Post Processors - Wire EDM
- Save the post processor you’d like to use to the desktop. You can do this by finding the post you need below, right clicking on the link, clicking on Save As, and selecting the location as desktop. Just make sure it is saving as a .PPR file rather than .HTML because that does happen from time to time.
- You will now need to import it; to do so, double click the Partmaster Post Processor icon from your desktop.
- From the top toolbar, choose Import and browse to the desktop where the modified post processor was saved.
When the file has been imported you will see the contents in the display area, next choose Compile from the top toolbar to create the .ppx file. The new post-processor is now ready for use. Close the post-processor by using File > Exit.
When you next run DCAM or DWES, the post processor will appear in the drop down list along with all original posts.
Dolphin CAD/CAM Systems produces Post-Processors for specific machine tool and controller combinations. It is the user’s responsibility to ensure that any output is compatible with YOUR machine tools and controllers.
Wire EDM Post Processors
Post Processors Name
Agie- Agiemeric CNC 123
W_Agie CNC 123
Agie - Agiecut 100
Agie - Agiecut 150
Charmilles Andrew EF 330
Charmilles ROBOFIL 200
Charmilles ROBOFIL 300/500 & 1020/2020
Charmilles ROBOFIL 300/500 & 1020/2020- uses G28/G29/G30 for arcs
Charmilles F 500
Charmilles F 530 -300 and 500 series machines
Fanuc Tape Cut 2 and 4 axis Model W0 W1 W2
Fanuc model 16
W_Fanuc 16 WA
Fanuc model H - no decimal pionts output - 2 axis
Fanuc - incremental mode 2 axis
W_fanuc 2axis incremental
Fanuc - incremental mode 4 axis
W_fanuc 4axis incremental
Fanuc model W0 outputs incremental & each contour as separate prog
Japax 2 axis mode
Mitsubishi 2 axis mode early post
Mitsubishi - FA 20S - 2 and 4 axis
Seibu 2 axis only
Sodick 2 axis mode
Sodick 2 and 4 axis mode